Arduino Mania Strikes Elkton

It all started innocently enough. I had $50 worth of Amazon gift certificates so I bought an Arduino Duemilanove from Hacktronics with part of the money. It came and I was thrilled to start blinking LEDs with it right out of the box. I wrote a little program that flashed “SOS” in Morse code. My wife said, “That’s kind of depressing.” So I changed it so that it sent “LOVE” in Morse code instead.

I don’t know why I am so surprised when things work the way they are supposed to. I think it probably goes back to all the times I built electronics kits and had to troubleshoot them for days to get them to work (if they ever worked at all). In any case, the bug had bit me. I started scouring the Internet for Arduino based projects.

One of the reasons that I was drawn to the Arduino in the first place was the concept of shields. Understand that this was not a new concept to me. The robots at work had been expanded through the addition of daughter cards that plugged into the motherboard. But the Arduino had dozens of shields that interfaced to all kinds of interesting hardware. And the best thing of all was that they were affordable on my next to non-existent budget.

I decided that I was going to build a robot from scratch. I had built a BOEbot and I still love to tinker with it but I had the urge to create a unique robot that was my design from the ground up. Oh, alright. I intended to assemble it from parts but I intended to build many of the boards as kits and assemble all the various pieces to make a unique final product. And what is really exciting is that it wasn’t just possible, it was down right easy.

I decided to build my robot around a chassis consisting of a Clementine tangerine crate that I had saved. I decided to use Google SketchUp to build a scale 3D drawing of the crate so that I could better visualize how I planned to transform it into a robotic vehicle. I managed to draw the crate itself fairly quickly but I’m still working on drawing the rest of the parts of the robot.

I drew up a prioritized list of parts that I thought I would need for the robot. At the top of the list was a Proto Shield. A Proto Shield is a board that has many uses but is often used as a place to mount a mini breadboard for experimenting with various hardware interfaces. The other major item on the list was a Motor Shield. The Motor Shield that I bought has connectors for 2 PWM servos and can control up to 4 bi-directional DC motors.

While I waited for my new hardware to come in, I decided to play with the hardware that I already had. I took one of the Infra-red receivers that came with my BOEbot and an old Sony CD player remote that I found laying around (the CD player had gone to hardware heaven years ago) and decided to see if I could get them to work together using the Arduino as the controller for the IR receiver. I got the circuit hooked up pretty quickly. Note: when building a circuit on a breadboard of one battery operated robot for control by another battery operated device, make sure you use a common ground. I eventually decided to just use the USB power from the Arduino.

Now I was ready for software. I Googled Arduino and IR and found RTFA‘s video on YouTube. I followed the link to his site and downloaded his code as a starting point. I hacked it to work with the particular remote that I was using and before my Proto Shield had even arrived I had created my first Arduino based hardware hack.

Then the hardware arrived. As I was soldering the power plug on the end of the wires coming out of theĀ  9 volt battery holder with switch that I had bought, I decided that I was going to need a better soldering iron than the little pencil style iron that I had used for 30+ years.

The two criteria that I had were that it had to have a switch so that I didn’t have to bend over to plug it in and unplug it every time I used it and it had to have a shielded stand so that I could safely set it down while it was hot. The next day, I want to my friendly neighborhood Radio Shack and decided that the difference in price between the iron that met my minimal requirements and one that was variable digitally temperature controlled was small enough that I couldn’t justify not buying the fancy one.

It took me two evenings working about an hour an evening to assemble and test the Proto Shield. It took about 5 minutes to move the IR receiver circuit over to the Proto Shield and get it working.

Stay tuned. More mania is on the way.

Blog Post from ScribeFire

I download Firefox 3.5 today. While I browsed through the add-ons trying to replace the functionality of the add-ons that 3.5 made obsolete, I came across ScribeFire. It scratched an itch that I didn’t even know I had. Maybe this will help me start posting to my blog on a regular basis again.